Green Tractor Talk banner

3033r hydraulics

965 Views 2 Replies 3 Participants Last post by  ridesdirt
I went to my local Deere dealer to get a price on rear remotes.. well they wanted 2k for just parts.. I can not justify that so I am going another route.. I ordered an electric momentary valve from summit.. my question is about the existing hydraulics under the seat of the tractor.. from the research I have done there is a hard line that completes a loop running from the pump back to the tank that the factory rear remotes tie into.. does anyone have any insight on which side is the pump side and which side is the tank side.. the line goes from one side of the tractor to the other.. left to right or vise Versa.. thank you in advance
See less See more
1 - 3 of 3 Posts
I went to my local Deere dealer to get a price on rear remotes.. well they wanted 2k for just parts.. I can not justify that so I am going another route.. I ordered an electric momentary valve from summit.. my question is about the existing hydraulics under the seat of the tractor.. from the research I have done there is a hard line that completes a loop running from the pump back to the tank that the factory rear remotes tie into.. does anyone have any insight on which side is the pump side and which side is the tank side.. the line goes from one side of the tractor to the other.. left to right or vise Versa.. thank you in advance
Follow its route to the pump.
See less See more
lots of aftermarket options.

Ken at Home - BoltOnHooks LLC has kits put together, and I think he is moderator here too. Check his website, could be some good info there. If you are piece milling parts, he has a lot of fittings available too and some reference materials to boot.
  • Like
Reactions: 1
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top