Hey everyone I new to this. I have a John Deere 3038e with a front in loader. I having s little problem. My pto just stoped working. Only has 138 hrs on it since new. I replaced pto switch and solenoid. Any help would be appreciated! Is there a pto relay I am overlooking. Thanks. James.
James hayden
Joined
·
30,104 Posts
If not under warranty and/or your going to try to fix this yourself, then the next step before buying any more parts is to get the technical manual and follow the troubleshooting procedures in it, and then you can also view the electrical schematics.
John Deere Parts Online from Green Farm Parts: Free Shipping
(please verify this is the correct on before ordering)
John Deere Parts Online from Green Farm Parts: Free Shipping
(please verify this is the correct on before ordering)
Joined
·
30,104 Posts
James, sorry to hear of the issues with you and the tractor!
If you just replaced the coil on the solenoid, it's very possible the actual valve is "stuck" from lack of use.
Similar thread:
www.greentractortalk.com
If you just replaced the coil on the solenoid, it's very possible the actual valve is "stuck" from lack of use.
Similar thread:
PTO won't engage on 2018 3038e
My PTO won't engage. On this model, the PTO engages with a switch on the right fender console. The PTO light on the dash lights up and it shows PTO rpm as expected (rpm changes with throttle position) but the shaft doesn't spin. From what I've read, there's a solenoid that actuates the PTO...
www.greentractortalk.com
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
