Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
35 Posts
Discussion Starter #1
Hi, I am making my own Mule Drive cover for my 332. I have it made up but a couple things I have a question about. 1. What size are the bolts that hold it on? nothing I have seems to be right. I know they are metric but seems to be an odd size. 2. The adjustment indicator rod is long gone so I have to make one as well. When it is in place is it behind the plate so it is visible looking through the adjustment slot or does it stick through to the outside of the cover? hard to tell in the pictures.
 

·
Registered
Joined
·
1,040 Posts
I've put Aux Hydraulics mule drive link up for you to see: It should help you figure it out. Yes the bolts are metric for the cover plate. Yes the adjuster lever is behind the cover plate.
 

·
Registered
Joined
·
35 Posts
Discussion Starter #3
I've put Aux Hydraulics mule drive link up for you to see: It should help you figure it out. Yes the bolts are metric for the cover plate. Yes the adjuster lever is behind the cover plate.
Great thanks, There are two threaded holes on the sides at the bottom. Any idea of what they were or are for?
 
1 - 3 of 3 Posts
Top