Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
I've been working through a bunch of error codes on this since I bought it and this is the last one I have. I can't find anything to point towards what it may be. Can anyone help?
 

·
Registered
Joined
·
472 Posts
That could be a hydro setting, not an error code. Forget exactly what it is but maybe the amount of roll out after taking your foot off the hydro pedal? I know it's adjustable via switches. Haven't changed/adjusted mine in a long time.
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thank you! That makes a lot of sense. Do you know how to enter diagnostics and change that setting?
 

·
Registered
Joined
·
472 Posts
Here's from the online manual:

Changing MotionMatch Setting
1. Press and hold the display mode switch until the display reads “Release”.

2. Release the display mode switch and display should read “Coast”.

3. Press the display mode switch once again.

4. For machines without MotionMatch switch:

a. Push the turn signal switch and return to neutral position to change to desired setting between 1 and 9. Position 5 is displayed as “DEF”, the factory default.

5. For machines with MotionMatch switch:

a. Push the turn signal switch and return to neutral position to change to desired setting between 5 and 9. Position 5 is displayed as “LONG_D”, the factory default.

b. Push the turn signal switch and return to neutral position to change to desired setting between 1 and 5. Position 5 is displayed as “SHRT_D”, the factory default.

6. To confirm the changes for MotionMatch setting, press display mode switch once again.

Operator Station Controls (eHydro No Cab)
MX36389

Picture Note: All controls shown may not be installed on your machine.

A - Turn Signal Switch

B - Display Mode Switch

C - Light Control Switch

D - Engine Speed Hand Throttle Lever

E - Rear Power-Take-Off (PTO) Engagement Knob

F - Ignition Key Switch

G - Forward Travel Pedal

H - Dual Selective Control Valve (SCV) Lever

I - Reverse Travel Pedal

J - MotionMatch™ Switch

K - Accel/Decel Switch

L - Cruise Control Switch

M - Third SCV Lever

N - Diverter Valve Switch

O - Rockshaft Adjustable Depth Stop Knob

P - Rockshaft Control Lever

Q - Mid-PTO Engagement Knob

R - Seat Belt

S - Mechanical Front Wheel Drive (MFWD) Knob

T - Transmission Range Shift Lever

U - Right Turn Brake Pedal

V - Left Turn Brake Pedal

W - Tilt Steering Control Lever

X - LoadMatch™ Switch
 
1 - 4 of 4 Posts
Top