Green Tractor Talk banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
3,564 Posts
I had 2 3720's, a cabbed and open station.

Both would lift the front of the tractor off the ground without using the curl, but the loader did not go down that far, so only a few inches before the cylinder bottomed out with no more travel.

These loaders are speced as to what they lift at the pins. The farther out from the pins, the less it can lift. So with the weight out a long way on your pallet makes it harder for the loader to lift.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top