Another post has information on hose routing kits for the 3rd SCV on 1025r. I wanted to show an option for those budget minded folks. I know all the connections and lines can be added to the loader with a special kit. However most grapples are used a various or limited times. I chose to just use nice hitch pins...splitting same and twist opening. The hose can then be laid into the pins and then removed when grapple removed. Also If the rubber coating goes on the pins then simple tubing can be slipped over the metal. The new SCV kit has the outlets on the side. Anyway just some thoughts from Kentucky.
125.1 KB Views: 21