Green Tractor Talk banner

1 - 8 of 8 Posts

·
Registered
Joined
·
204 Posts
Discussion Starter #1
I'm turning on the PTO with no action from the PTO. The light comes on the dash, checked all the fuses, checked all the wire connections to the PTO and they are all connected. Thoughts?
 

·
Registered
Joined
·
4,440 Posts
-fuses
-hyd oil level?
 

·
Registered
Joined
·
204 Posts
Discussion Starter #5
Does the tractor have electro/hydraulic or a manual level that activates the PTO.

Electro, the plug has disconnected from the PTO switch in the past. I checked it and its still connected and the light on the dash lights up.
 

·
Registered
Joined
·
194 Posts
See if you can check voltage at the selinoid. If its there you might have a stuck selinoid valve. Curious if you turn pto on does the pto rpm go up and down with acceleration.
 

·
Registered
Joined
·
204 Posts
Discussion Starter #8
After tinkering with it for 20mins, I figured it out. The 540 lever, was not fully engaged for the RPM's go above 1500. It was sitting between 540> and 540<, Once I slammed it back and it locked in, it started working. Thanks for everyone's help.
 
1 - 8 of 8 Posts
Top