Green Tractor Talk banner

1 - 6 of 6 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
I've got a 2013 5075E w/ a new H240 FEL with about 2300 hours. Recently the hydraulics have gotten "intermittent". The power steering, 3-point and FEL all will cycle operating for a couple of seconds then not. It seems a pretty regular cycle, but it's a real pain to operate. I've got a new filter to put on and the fluid looks clear. Any ideas?
 

·
Registered
Joined
·
16 Posts
Discussion Starter #3
Thanks!

I'll try that. I did get the filter changed Monday and the fluid was muddy looking. Changing the filter improved it's performance, but it's still not right.
 

·
Registered
Joined
·
159 Posts
If it looks milky, then you need to change your hydraulic fluid and clean sump strainer and put another new hydraulic filter on. Check for cracked shifter boots, its a common area that water can get into system. You have to drain hydraulic oil to clean the sump strainer.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #5
Alls good

I changed the fluid and cleaned the screen on the sump filter and everything is working fine. Thanks!
 
1 - 6 of 6 Posts
Top