Green Tractor Talk banner

5105 Oil Change in MFWD Axle Hex size for fitting plug

1457 Views 2 Replies 2 Participants Last post by  ab29732
Does anyone know the correct Hex size for the drain/fill plug in the wheel hubs for a 5105 with MFWD? It's not the 1/2" drive like the differential.
1 - 3 of 3 Posts
I am 75% sure that it will be 12mm. Later serial number 5105 used 1/2" square. The later ones had different plugs but no spec is listed in system. Wish I could be 100%, but been a while since I serviced one.
  • Like
Reactions: 3
You were correct. 12mm. The differential took a 1/2” square. The hubs were 12mm hex. Thanks.
  • Like
Reactions: 1
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.