Welcome to GTT
Yes one needs to attach open center joystick valve in series into hyd system
Yes one needs to attach open center joystick valve in series into hyd system
5205 front end loader
I have a 2010 5205 with a 522 front end loader. It is plumbed to the rear remotes,using the factory scv levers to control it. Is it possible to install a single joystick mounted near the steering wheel???
1 - 6 of 6 Posts
I replied to your same post in Utility TractorsI have a 2010 5205 with a 522 front end loader. It is plumbed to the rear remotes,using the factory scv levers to control it. Is it possible to install a single joystick mounted near the steering wheel???
So the lines from the loader cylinders into the new valve and a pressure line in and a return back to the tank?
The loader cylinder lines will connect to the new valve, freeing up your rear SCVs.So the lines from the loader cylinders into the new valve and a pressure line in and a return back to the tank?
But plumbing the new valve is more complicated than pressure in and return back to tank.
If buying the JD mid valve, it should have plumbing instructions.
You have open center hydraulics. Valves for open center systems plumb in series with power beyond to the next valve, plus a return to tank.
I’m gonna try not to go the mid valve route because of the price..I’m thinking about getting a hema or prince valve
1 - 6 of 6 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Green Tractor Talk
A forum community dedicated to John Deere tractor owners and enthusiasts. Come join the discussion about towing, PTO’s, reviews, attachments, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
Join now to ask and comment!
