Green Tractor Talk banner

1 - 8 of 8 Posts

·
Registered
Joined
·
316 Posts
Discussion Starter #1
On a x7 series tractor, if you angle the quick-hitch 54" blade either full left or right, how wide is the cleared path? I believe the 47" snowblower clears the width of the tractor. Is that true of the blade when angled?
 

·
Registered
Joined
·
117 Posts
It clears the width on my x728 when turning. If I had to estimate, I'd say about 48 inches
 
  • Like
Reactions: JDGreen-n-Yellow

·
Premium Member
Joined
·
893 Posts

·
Registered
Joined
·
1,011 Posts
When I owned an X738 I also plowed using the 54" blade. I stored my tractor in an 8x12 shed which had a 5' door. No problems at all as the blade fully angled is about 50" wide.
 
  • Like
Reactions: JDGreen-n-Yellow

·
Premium Member
Joined
·
893 Posts
If the 54" deck will fit a fully angle 54" blade will fit.
 

·
Registered
Joined
·
316 Posts
Discussion Starter #8
If the 54" deck will fit a fully angle 54" blade will fit.
Unfortunately I have a different storage situation for mowing season and snow season. I don't mind moving vehicles around to get the tractor out with the deck for mowing but that's not going to happen in the winter when I have 2'+ snow drifts outside the garage.
 
1 - 8 of 8 Posts
Top