Green Tractor Talk banner

1 - 4 of 4 Posts

·
Premium Member
Joined
·
1,626 Posts
Discussion Starter #1
You guys seem pretty handy with metal. Is there any chance you would want to go into the 54" wing market? I've been peering around the web and couldn't come up with anything other than a couple "close enough" threads elsewhere.

-636

Sent from my HTC6500LVW using Tapatalk
 

·
Premium Member
Joined
·
1,626 Posts
Discussion Starter #2
Something that angles forward to help reduce spillage. Maybe even box the ends in somewhat.

Sent from my HTC6500LVW using Tapatalk
 

·
Premium Member
Joined
·
1,626 Posts
Discussion Starter #4
That sort of looked like extentions and I was hoping for more of a boxed end. I had a 60" blade on my Scambler and that was my big issue with it. I just ordered a 54" for the 1026R and I know I'll use angle more now that it's power, but my drive isn't windrow and go friendly. Adding width isn't my concern. Cutting down on cleanup passes is more my goal. I thought maybe starting a thread would open up the topic on GTT. I saw a couple threads on MTF and not really a great solution. I don't believe they would be complicated to produce and there has to be thousands of Deere 54" blades out there for you to equip. :D

Sent from my HTC6500LVW using Tapatalk
 
1 - 4 of 4 Posts
Top