Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
28 Posts
Discussion Starter #1
Hello, maybe someone can help me. I am trying to put my 60D quick hitch mower on my 1026R tractor. I get it on everything looks fine except it doesn't lock so I get off and lock it and as soon as I lift it it falls off. Is it out of adjustment.
 

·
Administrator
Joined
·
20,906 Posts
Sounds like you front draft arms need to be adjusted. Check out the 1 series mower setup and adjustment thread. It's a "sticky" thread located at the top of the SCUT section.

If all the other adjustments are ok, then loosen the front draft arm nuts 1 turn each following up with tightening the back ones up the same. This should help with your locking problem assuming there is no binding or other issue with the locking mechanism. :good2:


Sent from my iPhone using Tapatalk 2
 

·
Registered
Joined
·
28 Posts
Discussion Starter #3
After I posted this I looked around on here to see what it looked like locked. This is a little embarrasing I was actually unlocking it and thought I was locking it.
 
1 - 3 of 3 Posts
Top