Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
Hello I'm new here trying to get some help with my 690elc., when I move the joy sticks it stalls the engine.. No power?? Can anyone help? Thanks jon
 

·
Super Moderator
Joined
·
7,874 Posts
Will the engine rev to full speed when throttled-up prior to attempting to use the hydraulics?

If it won't I'd suggest checking your fuel & air filters for contamination. If it will then you most likely have a restriction in your hydraulic system.

It's most likely a closed-center system. Check the simple things first. Plugged / restricted hydraulic filter(s)? Kinked or pinched hydraulic hoses. Beyond that you'll need a hydraulic flow chart with procedures to test the system.
 

·
Super Moderator
Joined
·
7,874 Posts
Hi yes the engine reved up and I did check hoses and other things but no luck..
........then you most likely have a restriction in your hydraulic system.

It's most likely a closed-center system. Check the simple things first. Plugged / restricted hydraulic filter(s)? Kinked or pinched hydraulic hoses. Beyond that you'll need a hydraulic flow chart with procedures to test the system.


Without a workshop repair manual it's nearly impossible to provide any further assistance.
 
1 - 4 of 4 Posts
Top