I just answered your other post...
7130 1000 RPM PTO Trouble
7130 Premium tractor, when I use the 1000 rpm pto the tractor is derated and will only allow the shaft speed to reach a maximum of 600 rpm's.. 540 works fine.. Does anybody have any ideas as to what my problem may be??? When using it on my feed cutter 600 rpm's is just not enough to cut the hay but the torque is there so I am feeling it is an electronic issue. THANK YOU to anybody and everybody who can offer me some advice!!!
1 - 2 of 7 Posts
Welcome to GTT!
Here is the descriptions to go along with the drawing above:
PTO / WHICH-END OUT
Here is the descriptions to go along with the drawing above:
PTO / WHICH-END OUT
| Cart | key | PART NO. | PART NAME | QTY | SERIAL NO. | REMARKS |
| 1 | L169986 | Shield | 1 | | ||
| 2 | 19M7774 | Screw | 1 | | M6 X 12 | |
| 3 | 19M9752 | Screw | 2 | | M4 X 20 | |
| 4 | AL173091 | Switch | 1 | | ||
| 5 | L169405 | Bracket | 1 | | ||
| 6 | 19M8290 | Screw | 2 | | M6 X 35 (10.9) | |
| 7 | AL174461 | Power-Takeoff | 1 | | ||
| 8 | AL170351 | Seal | 1 | |
1 - 2 of 7 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Green Tractor Talk
A forum community dedicated to John Deere tractor owners and enthusiasts. Come join the discussion about towing, PTO’s, reviews, attachments, modifications, troubleshooting, maintenance, and more!
Full Forum Listing
Recommended Communities
