Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Had the lever yoke for ABCD break. Replaced it. Did not take anything or linkage apart. Drove it around the shop and when I went to back up. I didn't have any reverse! Tractor sounds like it is going to start reverse but doesn't move. Any suggestions?
 

·
Registered
Joined
·
930 Posts
Do you have power reverser{left hand reverser}? EIther way, there should be no connection between the ABCD linkage and reverse. If not left hand reverser, the forward/reverse linkage may need adjustment. If left hand reverser, it is possible you could have disconnected wire to reverse solenoid while repairing the linkage.
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
That’s what I thought Monday. I looked everywhere. I slept in it and Tuesday morning I took the reverse linkage apart and adjusted it slightly. It now works. I guess in putting the yoke back on (I didn’t take reverse and the 1-4 off) it slightly push the whole thing down. Thanks for your reply!
 
1 - 4 of 4 Posts
Top