Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
I changed a bulb in the dash board panel and when I turn the key on all the lights flash and the gauges move erratically, including indicator lights on the right side of the cab. The engine starts but nothing runs. Any suggestions?
 

·
Registered
Joined
·
715 Posts
I changed a bulb in the dash board panel and when I turn the key on all the lights flash and the gauges move erratically, including indicator lights on the right side of the cab. The engine starts but nothing runs. Any suggestions?
Occam's razor: Since the trouble started after changing the bulb, the simplest explanation is that the cause stems from that action. What's required to change the bulb? Did you dislodge a connector? Did you somehow damage the cluster assembly?

Al
 

·
Registered
Joined
·
2 Posts
Discussion Starter #3
I replaced the battery and that solved the problem. The old battery was able to turn it over but appears it was in need of replacement. While all the lights and gauges are back to normal I do have an Alternator relay defective message (302124/31 BCU)?
 
1 - 3 of 3 Posts
Top