Green Tractor Talk banner

790 brake repair video??

3386 Views 3 Replies 3 Participants Last post by  flyweight
Hello,

im looking for information on doing a brake job for a 790 and was hoping for a useful video or written instructions. Anyone have any such things? I suppose I can order this, but find narrated video to be really helpful for things like this.

any advice or suggestions are welcome.
1 - 4 of 4 Posts
Hello, jstiehr.
Welcome to GTT.

Disconnect the brake linkage at the lever(1).
Remove 6 bolts and washer(3 & 4).
Remove cover and gasket(5 & 6).
Remove spring(7.)
Pad(8) will fall on your toes if your standing too close. ;)
Inspect springs(7) and drums(9).
Purchase replacement parts as needed, along with new gaskets(6) and O-rings(2)
Reassemble in reverse order.
(y)
How simple and easy is that?

794407
See less See more
  • Like
Reactions: 1
Hello, jstiehr.
Welcome to GTT.

Disconnect the brake linkage at the lever(1).
Remove 6 bolts and washer(3 & 4).
Remove cover and gasket(5 & 6).
Remove spring(7.)
Pad(8) will fall on your toes if your standing too close. ;)
Inspect springs(7) and drums(9).
Purchase replacement parts as needed, along with new gaskets(6) and O-rings(2)
Reassemble in reverse order.
(y)
How simple and easy is that?

View attachment 794407
That sounds very simple. I need to at least check the brakes on my 790 but will get the O rings and gaskets first. They may or may not be ok and if ok, I'll just seal them back up.
See less See more
  • Like
Reactions: 1
My 750 has the same brake set up. When I bought it(used), I removed and sanded the brake pads and the brake drum surfaces. They work well.
  • Like
Reactions: 1
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top