Green Tractor Talk banner

926 Moco help with cylinder not raising!!!

1176 Views 2 Replies 3 Participants Last post by  jdmich
I have a 926 John Deere Moco that I just had both cylinders rebuilt on the cylinder on the left with the two spouts has one hose going to l the other cylinder on the right but it is not raising the right hand cylinder what could be causing this problem? I've tried to blow out the line to see if maybe it was clogged and it was okay.
1 - 1 of 3 Posts
👆Good advise. We have a 820 and blew a hose on ours and had to fill the right cylinder afterwards as air is hard to bleed in this setup. We had to cycle several time before they both started raising equal.
1 - 1 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.