Green Tractor Talk banner

1 - 20 of 21 Posts

·
Registered
Joined
·
70 Posts
Discussion Starter #1
I took delivery of my new 1025R FILB today. I opted to go with the 16" bucket on the BH. I got a 54D deck to go with it. I'm going to install and set it up myself. With the FEL and BH attached, it is much larger than my LX255.

- Pete
 

Attachments

·
Registered
Joined
·
4,480 Posts
Congrats and Welcome from New York.
:wgtt:

Thanks for sharing a pic of your new tractor.
 

·
Premium Member
Joined
·
423 Posts
:greentractorride::wgtt:
 
  • Like
Reactions: greenharley

·
Registered
Joined
·
471 Posts
Welcome and congrats on the new :greentractorride:
 
  • Like
Reactions: greenharley

·
Registered
Joined
·
12,492 Posts
:wgtt:
 
  • Like
Reactions: greenharley

·
Registered
Joined
·
536 Posts
:wgtt: :good2:
 
  • Like
Reactions: greenharley

·
Premium Member
Joined
·
14,898 Posts
Welcome from Preston County, West Virginia

:wgtt:

:congrats::greentractorride::bigthumb:
 

·
Premium Member
Joined
·
13,648 Posts
Congrats on the 1025R :good2:

:wgtt:
 

·
Registered
Joined
·
2,075 Posts
Great minds think alike!
 

·
Super Moderator
Joined
·
2,452 Posts
Congratulations. Sweet ride :bigthumb:
 

·
Registered
Joined
·
176 Posts
Very nice!!!! Congrats and BE CAREFUL!!! with that new toy.:usa:bigthumb:
 

·
Registered
Joined
·
70 Posts
Discussion Starter #14
Thanks for all the comments. I installed the deck linkage and the auto connect drive kits today. I still need to finish the deck assembly and then I can work on installing and leveling the deck.

I forgot to mention that before I even signed the purchase order at the dealer, I ordered a set of Ken's bolt on hooks and clevises, and a diff lock pedal. I also ordered a spinner knob and deck leveling gauge. When the dealer was in the driveway unloading my new tractor, the postal carrier pulled up behind him and dropped off those two packages. So I got the tractor and my first accessories showed up at the same time! I installed the diff lock pedal and spinner today.
 

·
Senior GTT Super Slacker
Joined
·
37,812 Posts
I took delivery of my new 1025R FILB today. I opted to go with the 16" bucket on the BH. I got a 54D deck to go with it. I'm going to install and set it up myself. With the FEL and BH attached, it is much larger than my LX255.
Congratulations and welcome to GTT. :thumbup1gif:
 
  • Like
Reactions: etcallhome

·
Registered
Joined
·
70 Posts
Discussion Starter #16
After seeing how much schmutz my portable generator magnetic drain plug collects, I had already decided that I was going to order one for the 54D gearbox. When I took out the plug this morning to check what size to order and put oil in the gearbox, I was pleasantly surprised to see that the factory plug is magnetic. :yahoo: Way to go Deere! :thumbup1gif:
 

·
Bonehead Club Lackey
Joined
·
10,269 Posts
Welcome...Congrats...Thanks!!! :bigthumb:
 

·
Registered
Joined
·
1,072 Posts
Welcome and congratulations on the new rig
 

·
Premium Member
Joined
·
2,750 Posts
Congrats on the new unit. Enjoy it and be safe. Good luck. :good2:
 
1 - 20 of 21 Posts
Top