Green Tractor Talk banner

1 - 14 of 14 Posts

·
Premium Member
Joined
·
1,320 Posts
Discussion Starter · #1 ·
Added 2” Wheel spacers to my 2025R tonight.
excited to test it out tomorrow.

Before/Stock width.
782406


These are the after pics after adding 2” wheel spacers .
782407

782408
782409

782410
782411
782412
 

·
Registered
Joined
·
1,767 Posts
Looks good👍 What type did you get, I need some and just started to look at them. Thank You
 
  • Like
Reactions: Upset264 and cc1999

·
Registered
Joined
·
139 Posts
I also need to do this as I've now been out on my tractor trying to mow a couple times and have come to realize that I need to have a little more stability on my grade. Don't think I'll ever be able to go side to side but would at least like to take on some of the slopes at an angle so I can switch up my mowing patterns.
 

·
Registered
Joined
·
3,165 Posts
Looks like they will work well. I have been thinking about wheel spacers for mine. Are the 2” ok with the deck? I have a 60D, could not tell in the photo what yours is.
 

·
Premium Member
Joined
·
1,320 Posts
Discussion Starter · #5 ·
Looks like they will work well. I have been thinking about wheel spacers for mine. Are the 2” ok with the deck? I have a 60D, could not tell in the photo what yours is.
Should be ok on the 2025R. I have not put my deck back on yet to confirm.
Probably not on a 1025R.
Looked like the rear tires were far enough back from the deck that spacers on the gen 2 2025R should be a non issue.
 
  • Like
Reactions: driveshaft

·
Premium Member
Joined
·
1,320 Posts
Discussion Starter · #6 ·
Looks good👍 What type did you get, I need some and just started to look at them. Thank You
Mine a are steel, with solid centers, they come unpainted , since the 2025R axles and frames are black I painted them black.

These are custom made and take 2-3 months to get.

I will look up all the contact info and details on where mine came from and what they cost etc.
 

·
Premium Member
Joined
·
1,320 Posts
Discussion Starter · #8 ·
Here is link to where I got these and all the other tractor wheel spacers I have had.

I will have to track down the invoice when I get back to my office On Monday.
I am sure with all the steel and every other material cost skyrocketing.
They most likely will be more then I paid last year .
 

·
Registered
Joined
·
1,276 Posts
Looks good! Did you measure the outside width of the tires after spacers?
My 1025 is 51 inches after spacers 👍

if anyone is on the fence about it. Just get them. Its worth it
 

·
Registered
Joined
·
1,767 Posts
I don't have mower deck, but use loader or forks 3 times a week sometimes more. Again Thanks
 
  • Like
Reactions: cc1999

·
Registered
Joined
·
1,043 Posts
Looks good. I love mine. I put 1.50 in spacers on my 1025R
 

·
Premium Member
Joined
·
3,057 Posts
I also put 1.5" on my 1025R and had no problem with the 60D Deck
 

·
Registered
Joined
·
942 Posts
I have the 60” deck and would like to run the biggest spacer that will work with it. Hopefully the 2" clears everything.
 
  • Like
Reactions: cc1999

·
Registered
Joined
·
1,055 Posts
They will clear. That’s what i have on mine.
 
  • Like
Reactions: cc1999 and trav
1 - 14 of 14 Posts
Top