Green Tractor Talk banner
1 - 12 of 12 Posts

·
Registered
Joined
·
29 Posts
Discussion Starter · #1 ·
Was looking to add an angle cylinder to my 54" plow on my 318.
Have an #47 snowblower from which I could borrow a cylinder.
Are these basically the same?
Wondering if 4" travel is enough.
Anyone ever do this?
If it works, will just need a pair of brackets.
 

·
Premium Member
Joined
·
16,942 Posts
Check JD Parts, it will show if they are the same part number.
 

·
Registered
Joined
·
1,199 Posts
Well I have a 430 with the quick hitch and that has the 54" plow with squeegee edge and a 47" 2 stage that can quick go on at the ready. My 318 has the 47" 2 stage with the OTC Cab, the blower has a chute mod (electric actuator) the Tractor has all LED lights. Have a heater that came with the Cab, but can't power it due to limitations of the VR on the Onan. Looking at a rechargerable battery pack and a mount on the 3 point rear weight bracket to power the heater.
 

·
Registered
Joined
·
29 Posts
Discussion Starter · #8 ·
Was looking to add an angle cylinder to my 54" plow on my 318.
Have an #47 snowblower from which I could borrow a cylinder.
Are these basically the same?
Wondering if 4" travel is enough.
Anyone ever do this?
If it works, will just need a pair of brackets.
Only other question I have not researched is if the blower hydraulic lines are of suitable length for the plow.
 

·
Registered
Joined
·
372 Posts
Here's the angle parts list for the 54 blade. When I got my blade, I had to fab the mount for the angle cylinder on the blade part.
Wood Gas Cylinder Machine tool Machine
Wood Gas Engineering Composite material Machine
Wood Natural material Gas Metal Auto part


This is what I made up:
Wood Gas Bumper Machine Metal
Motor vehicle Aluminum can Tin can Wood Gas
 

Attachments

1 - 12 of 12 Posts
Top