Green Tractor Talk banner
1 - 12 of 12 Posts

·
Premium Member
Joined
·
19,839 Posts
Discussion Starter · #1 ·
A friend bought a Jd4110 with 410 fel. Guessing from what they told me the bucket was in bad shape. So what bucket series or tractor series will fit his fel.??
I was looking on line and if I looked at the correct fel , looked like a bucket fitting my 1026r or a 2210 would fit. So guessing that the 23** series should work also.

Just wondering to help a friend find a bucket..

Thanks.
 

·
Administrator
Joined
·
22,644 Posts
Any of the JDQA buckets will fit (except the very large ones used on the 500 series loaders), but used buckets are kinda hard to find...
 

·
Premium Member
Joined
·
19,839 Posts
Discussion Starter · #3 ·
Thanks for info ,now I find out he needs complete fel and mounts .. Depending either a 410 or any other mount or fel that would fit his 4110 tractor...

Thanks for any info.
 

·
Administrator
Joined
·
22,644 Posts
The 410 loader was originally sold for/with this machine, but its NLA. There are brackets available to fit the 200cx loader to the 4110-it will probably cost $3000 or so I'd guess.

Are you sure he has the hydraulics/joystick? Either way a aftermarket loader may be a better option $$ wise. Do you know his budget?
 

·
Premium Member
Joined
·
19,839 Posts
Discussion Starter · #5 ·
Thanks Kennyd , Well if 200cx would fit , guessing loader off a 2210 or 2305 would fit ??
Yea not sure how much they wanted to spend. Guessing they are reading this because I had told them to come and visit forum and read the answers instead of me relaying the info to them.
 

·
Administrator
Joined
·
22,644 Posts
Thanks Kennyd , Well if 200cx would fit , guessing loader off a 2210 or 2305 would fit ??
Yea not sure how much they wanted to spend. Guessing they are reading this because I had told them to come and visit forum and read the answers instead of me relaying the info to them.
Well, if they are reading...THEN REGISTER:laugh:

Yes, a loader of a 2210 or 2305 would fit, but only if the proper brackets are purchased (the ones from those models will NOT fit the 4110), those are spendy however. Used loader are few and fear between, and unless they are pretty wrecked still command a premium price.

I still think a aftermarket loader may be a better option...here are some names to search for one:

Bushhog
Quicke
Westendorf
Woods
Rhino
 

·
Premium Member
Joined
·
1,074 Posts
Since we're in "Bucket-Mode" ! How about a 6" -8" B/H Bucket? Either JD, or aftermarket? I believe it's a 47 JD B/H. Need to lay some 4" drain, and don't want to open up more ground than needed! I've got a 13" Bucket I rather not use. I've heard that with the smaller bucket, you can't get the spoil to dump out, but I'm mostly in gravelly soil.........TIA ~Scotty
 

·
Administrator
Joined
·
22,644 Posts
Since we're in "Bucket-Mode" ! How about a 6" -8" B/H Bucket? Either JD, or aftermarket? I believe it's a 47 JD B/H. Need to lay some 4" drain, and don't want to open up more ground than needed! I've got a 13" Bucket I rather not use. I've heard that with the smaller bucket, you can't get the spoil to dump out, but I'm mostly in gravelly soil.........TIA ~Scotty
Those are pretty rare, might want to search on tractorhouse or machinefinder for one. Be sitting down, they aren't cheap!
 

·
Registered
Joined
·
2,487 Posts
I'm in the middle of building a 6" bucket for my 46BH. It will probably be closer to 7" at the widest ,6" is minimum for the mounts,as I am tapering it to hopefully help dump the spoils. I'll get some pictures when I have something that starts resembling a bucket. BTW...have I said lately....I love my plasma!!
 

·
Administrator
Joined
·
22,644 Posts
1 - 12 of 12 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top