Any coupon codes for wheel spacers?
1 - 20 of 24 Posts
Joined
·
2,493 Posts
I do not. Sorry. Sounds like GWT is your best bet.
I guess I should reach out to them…but Courtney pushes them hard…so I’ll leave them to him.
Tim
Bora is a sponsor of GWT but there's no discount code that I'm aware of...
Joined
·
780 Posts
Agreed. No discount there, I asked. (I also noticed that his pricing per pair was actually the per ea. price once you got to the Bora site. He fixed that on the GWT site.) That pushed me to BroTek
Joined
·
3,799 Posts
Sorry about that guys, I watch all TTWT and GWT videos religiously , I knew GWT had been promoting bora wheel spacers in every video the past few months. I guess I just assumed it was one of his GWT discount vendors.
Thanks for the clarification. I am getting ready to order some 2” spacers for the front of my 4066R. I have 3” spacers already for rear, came off my old 3039R .
Thanks for the clarification. I am getting ready to order some 2” spacers for the front of my 4066R. I have 3” spacers already for rear, came off my old 3039R .
Joined
·
655 Posts
I like GWT but I'm not buying through his website if the price is the same. Throw me a little bone and I'll throw one back Courtney. And by bone I mean a little discount, free shipping, or something, on my end and a sales commission on his. Not that there's anything wrong with throwing bones if that's what a guy enjoys. 🤭
Joined
·
655 Posts
That's why you should deal with BroTek. Competition is good for everyone.
Doesn't seem to work for me...
Hmmm, maybe a call to them?
Maybe, but I've never heard Courtney say there was a discount in any of his recent videos. He just says he's sponsored by Bora.
Joined
·
11,489 Posts
Motorsport Tech / Bora (aluminum) & Stahl (steel) spacers offers an occasional discount, usually around the Thanksgiving through Christmas Holidays if you can wait. I believe that it's 20% off but could be mistaken.
Motorsport Tech Wheel Spacers
I use their Stahl / Steel 2" spacers on both the 3320 and the 2032R. These spacers use the original wheel lug bolts which I prefer to spacer mounted studs and tapered seat lug nuts. They're also a lug + hub centric design.
Motorsport Tech Wheel Spacers
I use their Stahl / Steel 2" spacers on both the 3320 and the 2032R. These spacers use the original wheel lug bolts which I prefer to spacer mounted studs and tapered seat lug nuts. They're also a lug + hub centric design.
You’re absolutely correct, just sponsored. There are a Baker’s dozen of other places to get his 5% discount. You’d think Bora would offer the same, I stand corrected!
Joined
·
3,799 Posts
I did the same thing, I would have swore that Bora had the GWT discount, that Courtney pushed it that way in the videos.
I went and spot checked a couple and Mark is correct he just says sponsored by Bora.
I guess a person hears all these sales pitches so many times that they start running all together in ones head.
I did get my 2" steel spacers for the front of my 4066R ordered from Lenny (@Bora) today.
Why did you add 3" rear spacers? Stability? I was thinking about removing my 6" spacers as the tires seem to stick out so far I'm always getting up against stuff. Most my implements are 6' wide... that extra foot of tractor width sure prevents me from getting into some tight places.
Joined
·
3,799 Posts
Yea, stability and clearances were improved. My new tires are same size on paper as the OEM R4 tires, but in reality they are a little larger in particular they are wider and I felt like even though they cleared everything, it still seemed a little tight. Also extra stability is generally a good thing. Took it for a shake down spin after installing them, it does improve the ride by reducing the side to side bounce.
I really only wanted to go 2" but since I already had these 3" spacers that came off my old 3R, I figured why spend the extra $$$ having new ones made.
Also I have a set of fender extensions setting on the shelf. I started to install those as well, but I can't seem to find the instructions or the hardware. LOL Been setting on the shelf a couple years now. LOL
I really only wanted to go 2" but since I already had these 3" spacers that came off my old 3R, I figured why spend the extra $$$ having new ones made.
Also I have a set of fender extensions setting on the shelf. I started to install those as well, but I can't seem to find the instructions or the hardware. LOL Been setting on the shelf a couple years now. LOL
I called Bora today asking about spacers for my x590 and they said they would be $283 shipped for the pair and they were 3-4 weeks out.
I then called BroTek and they had them in stock and shipped them out within 15 min of me placing my order. Cost was $220 for the pair.
I then called BroTek and they had them in stock and shipped them out within 15 min of me placing my order. Cost was $220 for the pair.
Joined
·
3,799 Posts
I forgot, I also recently bought a Maschio offset flail / ditch bank mower.
I am sure added stability will be much appreciated when using that ditch bank mower.
1 - 20 of 24 Posts
