Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
447 Posts
Discussion Starter #1
Got a question about the hydraulic connections. Looking to outfit a snow plow with power angle, can I just hook the lines right up to the hydraulic connections on the left boom? This is for the family farm and they have never hooked anything up to the connections, they use the bucket only. It is finally time to invest in a plow to manage the snow we can around here more efficiently. I have not had much wheel time on this model so I am a little unfamiliar with Skid Steer hydraulic hook-ups with the Case.
 

·
Registered
Joined
·
754 Posts
Wish I could post links to other websites with my tablet!

Do a search on " RED POWER MAGAZINE". You have to sign up/register, then post your question in the Coffee Shop forum. Several guys there are dealer or independent service techs and will be able to answer your question.
 

·
Registered
Joined
·
447 Posts
Discussion Starter #3
Thanks will do. I did speak to the service dept of a Case dealer in the area that I looked up today and they were glad to converse and be helpful talking me through things and possible issues to look out for using any piece of used hydraulic equipment. It seems that as long as the plow I buy has the correct hydraulic hookups I should be good to go, just hook up. If not I just need to get new fittings put on that match the Case. The foot pedals change flow backwards and forwards with a neutral stop in the middle. So LEFT and Right are flow forward and backwards and leave in neutral for the angle you want
 
1 - 3 of 3 Posts
Top