Green Tractor Talk banner

1 - 20 of 25 Posts

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #1 ·
Found this in the yard. Don’t know where it’s off of

782530
782531
782532
 

·
Premium Member
Joined
·
123 Posts
Do you have a trailer with electric shoe brakes?
 

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #3 ·
Nope
 
  • Like
Reactions: Jimmy Walker

·
Premium Member
Joined
·
123 Posts
Had anything delivered by a truck with air brakes or pulling a trailer? Trash truck been by lately?

I am pretty sure it is some form of roller for either electric or air brakes.
 

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #5 ·
Just loaded a pickup and dump trailer with wood but he was there when I found it. About 30 feet from his trailer. Probably unearthed while clearing woods
 
  • Like
Reactions: Jimmy Walker

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #7 ·
Nope
 
  • Like
Reactions: Jimmy Walker

·
Premium Member
Joined
·
7,940 Posts
I have seen this part before and I have a trailer with electric brakes. That might be a good call by Darryle.
 

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #12 ·
Could be the pulley pin from a 10k snatch block I tatered a couple months ago.

782566
 

·
Registered
Joined
·
1,549 Posts
You're gonna have to buy another one to bastardize, to appease the masses here on GTT now.
We're waiting.
 

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #14 ·
Good ideer
I still have the plates but the pulley is Mia. Probly spun off like a skeet shoot into the woods when it failed

782572
782573
782574
782575

Other plates in my ballast box outside. Most likely will fit in that one also since they’re identical. Glad it’s not some doohickey off the underside of my tractor.
 

·
Premium Member
Joined
·
7,940 Posts
Well heck once you find the pulley your back in business. Just put a blanket or something heavy like a big plate of steel over it before you use it, seems dangerous.
 

·
Registered
Joined
·
942 Posts
I'm glad we figured it out, I don't like unsolved mysteries.
 

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #18 ·
Well heck once you find the pulley your back in business. Just put a blanket or something heavy like a big plate of steel over it before you use it, seems dangerous.
I’ve since replaced it with a 20k of better quality.
 

·
Premium Member
Joined
·
4,717 Posts
Discussion Starter · #19 ·
I gotta give Darryle props for all the ideas. Once he said pivot pin I got the idea. Thanks guys
 
1 - 20 of 25 Posts
Top