Green Tractor Talk banner

Auto connect on 3000 series versus new 1 series

5145 Views 10 Replies 6 Participants Last post by  dschuffert
I am planning on buying a 1026r with an auto connect mower. Do any of you that have a 3000 series
tractor with auto connect have any problems with it? Thanks
1 - 11 of 11 Posts
The only guy I know that has a 3000 series and mows with it is Nuru. You could try to PM him if he does not hop in here.

3x20 is a huge tractor to mow with!
Brian, You forgot about me!! LOL

That's ok cause I have not taken my AutoConnect deck off yet. Hope to really soon so I can see how it comes off and on...


John
The only guy I know that has a 3000 series and mows with it is Nuru. You could try to PM him if he does not hop in here.

3x20 is a huge tractor to mow with!
3320 A/C deck

Attachments

Sorry! I thought you only had the 4x20 cab.:flag_of_truce:
That's ok. I really like the way my 3320 mows BTW.

Here is some cell phone pics from yesterday...

Attachments

I dunno about that...I mow an acre with a 4400 and 72" RFM. Works quite well too.
3x20 is a huge tractor to mow with!
That's a nice fleet KB9UDE! :cheers:
I removed and reinstalled the A/C deck a few times this week... IT is soooo easy. I love it!!!!!!!!!! :good2: :yahoo:
I mow about 6 acres with a 72" autoconnect deck on my 3720. I put the deck on before I go mow and take it off afterwards. I struggled the first couple of times and had to fine tune the alignment. Once I got it aligned, it is very simple and literally a minute or two process each time. It takes me longer to get out of the cab and set the height bar back to my desired cutting height than it does to drive on or off of the deck.
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top