Green Tractor Talk banner
1 - 1 of 1 Posts

·
Super Moderator
Joined
·
10,766 Posts
Years ago I put a #10 BH on my 1070 which was compatible with the #8 backhoe. The #10 BH was significantly heavier than the #8 and my front end was very light. I loaded the front tires and flat mounted a few slab weights on the front frame bracket and that solved the problem. Probably had an additional 400# out front to counterbalance the rig.

That #10 was quite a digger!
 
  • Like
Reactions: PJR832 and Xesike
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top