Green Tractor Talk banner
1 - 2 of 2 Posts

·
Registered
Joined
·
7,122 Posts
I would say more than likely it's a blown gasket. Make sure you replace it with a Kohler gasket. The fire ring on the Kohler head gasket is far superior to the aftermarket ones.
The manuals for the K321 are free from Kohler. It's easier to find them at wfmfiles.com.

You can deck thehead with sandpaper and a very flat surface, like a piece of glass. Don't worry about taking too much off. The head will still work with no inside ridge...don't go that far.
 

·
Registered
Joined
·
7,122 Posts
Thanks Mike for the reply and the tip to replace with a Kohler gasket. I'll look up the part number and make sure I get the OEM gasket.
Part# 47 041 15s
 
  • Like
Reactions: flyweight
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top