[4vertical]

I have been doing a bit of research on here. There is a little info on this skid plate but not much. Does anyone have pictures of the front and rear plate installed? The instructions say you cannot use the skidplate with the mid mount mower, has anyone modified one, or checked to see if might work with a slight massage?

I have been thinking it would be easier to buy one than make it. But if I can't use the mower as well it kinda stinks. It seems as though a few more minutes removing it wouldn't be that bad for mowing, but still something I don't wanna hassle with.

Thanks for any/all input.

-Aaron

 

[dellwas]

I've got a brotek on my 2305, both front and rear. Sorry no pics, and it would be a while until I could snap some, we're up to our butts in snow, and the tractor is outside. Seems to me that someone modified one to make it work with the MMM over on TBN. I'll see if I can find the link. I don't have a MMM so doesn't affect me.

I have been doing a bit of research on here. There is a little info on this skid plate but not much. Does anyone have pictures of the front and rear plate installed? The instructions say you cannot use the skidplate with the mid mount mower, has anyone modified one, or checked to see if might work with a slight massage?

I have been thinking it would be easier to buy one than make it. But if I can't use the mower as well it kinda stinks. It seems as though a few more minutes removing it wouldn't be that bad for mowing, but still something I don't wanna hassle with.

Thanks for any/all input.

-Aaron

 

[Doug]

Hi all, I have a 2305 A I found a person by the name of Jeffrey Yonkey that has made a transmission fan guard.
It does not protect the transmission filter but looks great and saves the fan and works with the MMM on.
He must make a couple and then lists them on ebay when they are gone they are gone until he makes more.

Doug

 

[dellwas]

I saw that on one of the other forums, but none were available when I wanted one. Bought the Brotek, and glad I did, gives me peace of mind because of the complete coverage...

Hi all, I have a 2305 A I found a person by the name of Jeffrey Yonkey that has made a transmission fan guard.
It does not protect the transmission filter but looks great and saves the fan and works with the MMM on.
He must make a couple and then lists them on ebay when they are gone they are gone until he makes more.

Doug

 

[4vertical]

Thanks for the info guys. With a bit of help, I was directed to another thread dealing with this. I had read it some time ago but had forgotten till i was reading it again, go figure. It seems as though there was no official word there either about the mmm working or not.

guess i will either have to fabricate, or just buy one and figure it out for myself. although i don't plan on doing too much mowing with those r4 tires, i don't want it to be a pita when i have to.

thanks,
Aaron