Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
66 Posts
Discussion Starter #1
JD 2750 tractor, Rotomec PHD 300 post hole auger...What type of sleeve/bushing do I need for the top link?

I think the used Rotomec I bought is the same as the Frontier PHD 300 post hole auger.

I bought the Rotomec PHD 300 for $550 with an 18" auger but have ordered from the JD dealer a 12" auger to go with it for posts. 18" for trees next year.

I ordered the shields for the PTO and upper gear protector from JD as well.

Also have a 5520 and 2155 but they are equipped with the JD quick attach, which the 2750 does not have.

As a side note, awaiting delivery of a Frontier CA 2072 Core Aerator which hopefully will work with the quick attach on the 5520.

Thanks for any help.
 

·
Premium Member
Joined
·
7,834 Posts
Frontier PHD300 uses CAT 2 pin size at the main frame top link position.
 
  • Like
Reactions: kylew

·
Registered
Joined
·
66 Posts
Discussion Starter #3
Thanks, will see what I can find. I am thinking the ROTOMEC PHD300 and Frontier are the same.
 

·
Registered
Joined
·
152 Posts
The same

I have a smaller frontier post hole digger and it’s a Rotomec.
 
1 - 4 of 4 Posts
Top