Green Tractor Talk banner
1 - 1 of 1 Posts

·
Registered
2021 1025R, 2016 x580
Joined
·
648 Posts
Just went out and looked at my 47 snow blower and pulled the manual to see what mine says...

The OP is correct, the manual is useless!! It makes no mention of the belt keeper next to the main drive pulley. It also says in Step 8 to "Install belt on snowblower drive sheave from below with V-shaped side of belt in groove of sheave". Only problem there is there is not enough clearance between the pulley and the lower bracket (number 10 in Sulley's graphic), that space is only about 1/2 the height of the belt.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top