Green Tractor Talk banner
1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 4400 with about 1500 hours and while operating in four wheel drive there was a sudden clunk and every few feet it would clunk or click. When I took it out of four wheel drive the noise went away. It was definitely coming from the front end. I need it to finish a project so cant tear into it just yet. Any ideas what may have happened? Maybe a tooth on a gear? Thanks in advance for any help.
 

·
Registered
Joined
·
5,456 Posts
Put it in 2wd
jack up one front wheel at a time and spin it.
If its a gear out by the wheel you will likely "feel" it.
Inspect the driveline /u jointsas well...Driveline will spin with the wheel thats raised.

I've chipped a few teeth on the gears by the wheel..not terribly expensive but that was years ago.

Hope your problem is not in the differential as that gets quite spendy
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top