Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
I am restoring a '81 4040

Here is my problem now. I replaced the drain lines for the AC with 1/2" air line but did not put a trap in the line. You know the little loop that at the end of the line. Does anyone know where to get the kind of tubing the JD uses unless you get it from JD?
Any other ideas how to make it work without pulling all the line back out?
 

·
Registered
Joined
·
932 Posts
It is really only 1/2" wiring loom without the split in it. Not sure how widely available it is. Looks like you can get it here: cabletiesandmore.com. Seems expensive at .69 per foot
 

·
Registered
Joined
·
932 Posts
It is really only 1/2" wiring loom without the split in it. Not sure how widely available it is. Looks like you can get it here: cabletiesandmore.com. Seems expensive at .69 per foot
Should have checked before. The spec on jd part is .413" inside diameter, .594 outside diameter. It comes in 15 foot length for $18.75. Part number H97644.
 
1 - 3 of 3 Posts
Top