[Acolar]

Has anyone found a good location in the 3x20 cab version to exit electrical wiring from the cab to the outside of the tractor. Looking at installing some lighting circuits as was hoping someone may have found a grommet or other suitable location to exit the control wiring from the cab without having to create a new opening.

Thanks

 

[RandyM]

I have no knowledge of your machine. Thus, I can't really make a recommendation. But, I am wondering how does the factor route the wires in and out of the cab? Is there any way you can sneak some wires in along side some factory accesses? :unknown:

 

[Brian]

I have a few wires run out of the cab, but its been a year or so since I have done it.

I know one of the wires follows the loom that goes by your foot pedals on the floor on the right hand side. You can see some pictures of it here:
http://www.greentractortalk.com/for...-without-Head-Lamps-on.&highlight=4x20+lights

I also believe there is a spot that is next to or behind the seat that you can get out.

 

[Acolar]

Brian, Randy

Thanks - I'll search out those areas. Yes my intent is to use a existing grommet and route the wires through it in order to maintain the cab sealing integerty for climate system.

Tony