Green Tractor Talk banner

1 - 3 of 3 Posts

·
Premium Member
Joined
·
7,504 Posts
Discussion Starter #1
A friend bought an old Farmall Cub.

The starter was modified to use a solenoid and push button. He says it should have a starter mounted switch and pull rod to activate the starter.

To modify the starter someone changed the field stud to bolt with a nuts on the exterior to bolt a cable to.

He bought the field stud, switch, and has the rod.

The field stud kit has the stud, washers (6), and a nut. The starter is Delco starter.

Anyone know the order the parts install? I know the stud will go in from the outside and the nut will be last :flag_of_truce:...…...Where do the washers install?

Any Cub or Delco Starter Experts?
 

Attachments

·
Registered
Joined
·
10,246 Posts
Not sure if this will help you. :dunno: See items 5 - 10.

Item 7 are the small diameter insulators that fit in the terminal bore of the starter housing.



 

·
Registered
Joined
·
10,246 Posts
I'm no expert on Cubs. If this is not correct, I'm certain someone will come alone to correct me. :mocking:

As I see it, place insulated washer (8) between item 7 and 9, on the inside of the housing.


 
1 - 3 of 3 Posts
Top