Green Tractor Talk banner

21 - 22 of 22 Posts

·
Registered
Joined
·
140 Posts
Woah, now I'm lost and therefore pulling an Emily Latella ("never mind") BUT: why can't you mount the receiver box adapter to the OEM plate THEN you can slide in 1. a flat tongue drawbar, 2. pintle hook drawbar 3. spring-loaded (absorbing) drawbar 4. hitch ball. All available from good Off-road shop, all fit a 2x2 receiver box. (they all live in a tool bag under the seat of my old Cummins-which is no longer road worthy:lolol:
 

·
Registered
Joined
·
140 Posts
Now if im wrong (again) and you're after the trailer end I'd fabricate from flat stock but make a clevis (sandwich a spacer block between an lower drawbar and an upper tongue to mate with the flat tractor surface. Hitching a flat towed bar to a flat towing bar is just:dunno: bad... especially when ya gotta stop (don't ask...) Wearing a hay wagon? uncomfortable, stopping a haywagon when you stop? yup, priceless:lolol:
 
21 - 22 of 22 Posts
Top