Green Tractor Talk banner

Ford 9N spark issues.

908 Views 2 Replies 3 Participants Last post by  letmgrow
I have a 1949 Ford 9N that had issues with sparking. I replaced the coil and everything in the distributor itself. Once I got the gap set to .015” I took a power probe and set the ground on the body and the power point in the screw that hold the condenser wire down. With the distributor out of the tractor whenn I rotate the crank shaft the ground never goes away wether the points are together or separated. I can’t figure out if this is normal or not but the tractor still has no spark. Any suggestions?
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top