Green Tractor Talk banner
1 - 2 of 2 Posts

·
Registered
Joined
·
125 Posts
Discussion Starter · #1 ·
It appears now that my fuel cutoff solenoid is not getting energized sometimes when I crank the engine, thus it will not start.
Possibly the ignition is not getting power to the solenoid; I notice that when I manually open/Shut the solenoid it will then start and somehow enough power gets to the solenoid to keep running. I think the first step will be to remove and check over the solenoid, double check all electrical connections(major source of these type of issues..after 30 years the connections need help).
After that I will pull out the electrical diagram and see where the power is, or isn't. Not sure if the ignition switch needs replacement yet.
 

·
Registered
Joined
·
125 Posts
Discussion Starter · #4 ·
Try pressing the Forward/Reverse pedals while holding key.

Just tested this on mine...possible fix...idk

If yours is cranking but Not starting..Probly not the issue.


Here you will find the wiring diagram...its quite aways down 3/4's or so

http://www.golftechs.us/Manuals/JDtractors.pdf


Seems to crank fine, the solenoid is possibly just not getting enough power to allow the fuel thru. I will go thru all the electrics when I get done with these 300 hay
bales..
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top