Green Tractor Talk banner
1 - 1 of 1 Posts

·
Registered
Joined
·
5,322 Posts
I've been working on this 62C deck, i'm thinking of changing the oil in the gear box. This is a older 62C deck, it looks like there is a lid that is pressed into the top of the gear box. The newer 62C decks have 4 screws on top of the gearbox. Are you supposed to pop the lid out, then unscrew the side nut to let the oil out?
Thanks,
KC1
My 62C is a 2006 vintage. I remove the gearbox and dump the oil out the side fill plug. I believe that top lid you are referring to is the top of the bearing race. I wouldn’t mess with that. Kind of a pain, but not something you need to do very often at least. I’ve changed mine 2 times in 15 years
 
  • Like
Reactions: Superglidesport
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top