Green Tractor Talk banner

1 - 3 of 3 Posts

·
Registered
Joined
·
104 Posts
Discussion Starter #1
I've got about a 1/4 turn play in the steering on my GX335. There is no play from the wheel to the steering box. It all seems to be from the pump to the cylinder. No cylinder reaction for a 1/4 turn. Any thoughts on correcting the problem? I sure would like to mow in straight lines again.
 

·
Registered
Joined
·
118 Posts
Sounds like the bolt holding the piston to the end of the shaft in the steering cylinder is loose. ND Industries Epoxy-Lock was used on the threads and I have seen them come apart in the past.
 

·
Registered
Joined
·
104 Posts
Discussion Starter #3
Thanks for the advice. You were correct EM! The bolt had loosened up, easy fix. Thanks again.
 
1 - 3 of 3 Posts
Top