Green Tractor Talk banner

1 - 12 of 12 Posts

·
Registered
Joined
·
253 Posts
Discussion Starter #1
Hi guys... steel crossmember going from left to right side of h120 loader looking to have a bend in it right near the middle (bucket has bend near same place ).

Anyone have a parts diagram for h120 loader with part numbers and names ???
 

·
Premium Member
Joined
·
6,593 Posts
This what you need? Looks like item 1.

Loader.jpg

Loader Boom
CartkeyPART NO.PART NAMEQTY SERIAL NO.REMARKS
1AW35012Loader Boom1
2W49647Bushing2
3W54319Bushing4
4JD7844Lubrication Fitting4
5AW34046Pin4
6W52052Bushing2
7W32257Bushing4
840M7119Snap Ring4
9W54102Cover1
10N189220Tie Band3
 

·
Premium Member
Joined
·
6,593 Posts
Here's the bucket.

bucket.jpg

BUCKET
CartkeyPART NO.PART NAMEQTY SERIAL NO.REMARKS
1W50426Safety Sign1
2W43359Hook2(A)
3W47211Pin2(A)
4W43355Wear Plate2(A)
5W44426Cutting Edge1(A) (B)
6BW15896Loader Bucket1(D) 1250MM
7JD7844Lubrication Fitting4
8AW34731Pin4
914M7291Flange Nut4M16
10T181070Spacer4FOR 1250MM BUCKET
CartkeyPART NO.PART NAMEQTY SERIAL NO.REMARKS
11BW14144Loader Bucket1(C) 1250MM
BW14145Loader Bucket1(C) 1350MM
BW14146Loader Bucket1(C) 1550MM
(A) Weld on(B) Cut to Length

(C) (Quick attach) Complete goods/ship bundle(D) (Non-quick attach) Complete goods/ship bundle
 

·
Registered
Joined
·
471 Posts
I bet those are :gizmo: parts! Out of curiosity how did you bend them!?
 
  • Like
Reactions: Levi

·
Administrator
Joined
·
18,527 Posts
I'm guessing from the description in the first post it's item #3 below, AKA the "timing rod":

PUM11646_______UN25JUN10.jpg

Bucket Holder
CartkeyPART NO.PART NAMEQTYSERIAL NO.REMARKS
1W50722Holder1RH
2W50723Holder1LH
3AW32737Pin1
4JD7844Lubrication Fitting2
5W33912Pin Fastener2
614M7291Flange Nut2M16
711M7015Cotter Pin23.200 X 25 mm
8AW33494Pin2
9AW30903Quick Lock Pin2
1011M7021Cotter Pin24 X 25 mm
 
  • Like
Reactions: Levi and 56FordGuy

·
Registered
Joined
·
253 Posts
Discussion Starter #7
Winner winner, thanks ken. I probably was not very precise with my description but yes indeed it appears to be the timing pin.

How did I bend it? No clue. I'm guessing it made contact with something like a stump and there was no actual bucket contact

Thankfully these rods cost 150 as opposed to 1500

Apparently these timing rods keep the loader arms in alignment, some posters have reported that their dealerships or metal workers have straightened out their rods. How important is this to be smooth straight and square?
 

·
Administrator
Joined
·
18,527 Posts
Being perfectly straight is not essential in this case, it's main function is just to keep the two QA shoes somewhat aligned. Straighten it the best you can, or find someone with a press to help you.
 
  • Like
Reactions: Levi and jermedic

·
Registered
Joined
·
56 Posts
Hey guys I've got a 1023E with an H120 loader and I need to find the rod thing that the bucket level indicator goes through. thanks!

Sent from my SM-G955U using Tapatalk
 

·
Super Moderator
Joined
·
2,607 Posts
Is this what you're looking for?

KEY 1 - BW15476 Bucket Level Indicator

KEY 2 - AW33460 Tube

KEY 3 - W51361 Pin

KEY 4 - 14M7296 Flange Nut

KEY 5 - 19M7162 Cap Screw

KEY 6 - 24M3527 Washer

KEY 7 - W51338 Bracket

KEY 8 - 14M7291 Flange Nut
 
1 - 12 of 12 Posts
Top