Green Tractor Talk banner

1 - 7 of 7 Posts

·
Registered
Joined
·
194 Posts
Discussion Starter #1
Ok so I’ve found a snowblower for my tractor I’m interested in. It was attached to a 1025r but all the seller is supplying from the looks of the pictures and talking is the long pto shaft to the snowblower and the snowblower and everything attached to that including the small pto shaft. So looking at the pictures I think I’ll just need the following, and bolt this to the tractor side of the quick hitch mount?

3DE44603-CE9C-4D9D-972F-8DBEC4F5FE5B.jpg
Going off jd parts I’ll need the following part numbers from the tractor towards the blower: 13,2B,3,1,2B,14

028D5E19-5AD1-4027-A825-AA7D5F6F639D.png

Thank you in advance!
 

·
Registered
Joined
·
194 Posts
Discussion Starter #2
I found another parts breakdown that has different part numbers, if it matters is a 2016 1025r but don’t think that would matter as this part mounts on the quick hitch plate and a pto shaft slides through it.

The one I posted above

268D46B6-0F12-4C1A-B74D-CCDF6D00F77A.jpg

And the one I made earlier from another parts breakdown

48D10D54-439D-4B74-AF2C-441DEB35E336.jpg

And there is about an $80 difference in parts
 

·
Registered
Joined
·
3,929 Posts
The quick hitch is a 2 part system,I would check with your dealer to see what you would need.
 
  • Like
Reactions: Winter83

·
Registered
Joined
·
194 Posts
Discussion Starter #4
The quick hitch is a 2 part system,I would check with your dealer to see what you would need.
Thanks! I’m actually picking up the quick hitch next week. Was told both connection points are included the part that mounts to the implement then the part for the tractor side.
 

·
Administrator
Joined
·
18,514 Posts

·
Registered
Joined
·
194 Posts
Discussion Starter #6
Thanks for the help! turned into a waste of my time. After negotiating with the cl seller and agreeing on a price and time to pick it up he goes and sells it out from under me and does not tell me until I email him to confirm I’m on my way money in hand. :thumbsdown: Back to the search!
 

·
Registered
Joined
·
2,115 Posts
Around here, the Quick Hitch components go for as much as new, if not more, for used. The same applies to the snow blower. There has been a used 47 snowblower, from a 1026R, on Craig's List for $3000. I paid $2920.00 for mine, new, with the Quick Hitch and everything to mount it.
 
1 - 7 of 7 Posts
Top