Green Tractor Talk banner
1 - 1 of 1 Posts

60 Posts
Hi, jallen,

Have you fixed this problem yet? If not, you might look at the bracket on the front of the tractor that the front draft arms swing up and lock into.
This bracket, I believe, has 3 sets of holes where it bolts to the front of the tractor frame. It should be bolted in different positions on a 4200 vs a 4300.
I can't remember exact positions but the reference you made to the different holes I believe is this bracket. Also, the position of the front of the rear draft arms is different for a 60" vs a 72". I have both of these mowers and tractors. If this does not help, let me know and I will try to be more specific and
maybe send some pics.
Good luck, and let me know how it turns out.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.