Green Tractor Talk banner

1 - 4 of 4 Posts

·
Registered
Joined
·
203 Posts
Discussion Starter #1
So i am trying to replace my fuel filter as part of my annual service and the manual is leas than helpful.

It says i should disconnext the fuel pump witinf harness then run the engine till it runs out of gas. The photo is completely unhelpful in identifying which wire in the rats nest is is for the fuel pump. Any help with an actual photo is greatly appreciated.


FWIW couldn't i juSt pinch off the lines for the same effect?

Also - how in blazes are those connectors supposed to come off? I am stumped.

Lastly - how do you pop off the fuel filter from those black plastic fasteners holding it to the frame without breaking them?


Thanks!
 

·
Registered
Joined
·
1,591 Posts
I have not changed the filter on my Gator yet, although I read in the manual how to do it.. The reason for disconnecting the pump wire & running the engine is the relieve the pressure in the fuel lines. If you pinch off the lines, there will still be gas under pressure in the filter. It will spray out when the lines are disconnected.
 

·
Registered
Joined
·
374 Posts
Don't you squeeze the clips?


Sent from my iPhone using Tapatalk
 
1 - 4 of 4 Posts
Top