Green Tractor Talk banner

1 - 6 of 6 Posts

·
Registered
Joined
·
256 Posts
Discussion Starter #1
Hi guys,

I just got an x758, I took off the snow thrower, and front bracket, and mid PTO connector. I put the dust caps on all the hydraulics.

I drove over the deck FLAT on the ground, I pushed the upper lever to try and drop the rear connection bar.....AND NOTHING HAPPENS

I have tried following the manual, Youtube videos, and NOTHING is working..

When I push the deck lift/drop upper hydraulic lever nothing is happening......what am I doing wrong?:banghead:
 

·
Registered
Joined
·
256 Posts
Discussion Starter #4
Lock out valve is behind the hydraulic coupler block

Sent from my SM-G930V using Tapatalk
Thanks a bunch man,.......despite this NOT being in the deck manual, and NOT being in ANY of the youtube videos, even from John Deere, this is exactly what it was.
In case anyone has the same issue, the valve needs to be turned counter clock wise and is beside the color coded hydraulic valve caps.....

I owe you a beer man!
 

·
Registered
Joined
·
132 Posts
Just hope ya didn't rip all yer hair out... and if ya ever come round south east va I'll take ya up on that beer🤠! Glad everything is good with the tractor

Sent from my SM-G930V using Tapatalk
 

·
Registered
Joined
·
1,264 Posts
It would not be in your tractor or mower manual because it comes with the snowblower kit. It should be in your blower's manual.

As noted above, in addition to the lockout valve you should also have a latch holding the draft bar in the upper position when the mower is not in use. That should be in the mower or tractor manual.

Rob
 
1 - 6 of 6 Posts
Top