Green Tractor Talk banner

1 - 10 of 10 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi all. I'm attempting to change the seal on the front end axle assembly on my JD 4500 compact tractor. I have it disassembled to the point where I need to separate the housings where the drive line transition.
I have attached a photo of the piece I am referring to in case I didn't use the correct terminology or didn't explain it clearly. Any input would be greatly appreciated!

Mike


Sent from my Pixel 3 XL using Tapatalk
 

·
Premium Member
Joined
·
10,147 Posts
Not sure how to help but you'll get more help if the post is in the proper section.

One of the mod's will catch this and move it for you.
 
  • Like
Reactions: RaggedEdges

·
Administrator
Joined
·
20,982 Posts
It was moved. :thumbup1gif:

I did edit the title for more views and responses. And it’ll help with future searches. :good2:
 

·
Premium Member
Joined
·
10,147 Posts
Ok thanks! Still finding my way around the site!

Sent from my Pixel 3 XL using Tapatalk
:thumbup1gif:

Now all we need is some of our experts to show up. :munch: It is Sunday, so they are probably sleeping in. :laugh:
 

·
Administrator
Joined
·
18,521 Posts
Not your exact machine, but the axles are the same (or very close):
 

Attachments

  • Like
Reactions: kylew and rtgt

·
Registered
Joined
·
6 Posts
Discussion Starter #8
Thanks Kenny! I can't seem to get the spindle gear (A) off of the shaft. It would appear that once those are off, the two pieces should separate.


Sent from my Pixel 3 XL using Tapatalk
 

·
Administrator
Joined
·
18,521 Posts
1 - 10 of 10 Posts
Top