Green Tractor Talk banner

1 - 6 of 6 Posts

·
Registered
Joined
·
447 Posts
Discussion Starter #1 (Edited)
I got a couple of sets of dust plugs for my 1025r and FEL and Snow Plow. I can figure out how to secure the plugs covers on the accessory side of things, but how have people attached them on the tractor side?
 

·
Registered
Joined
·
155 Posts
If you got the normal dust caps the loop goes around the pipe prior to putting on connector.

I don't take quick couple off, I zip tie the ring to pipe.

Right or wrong...
 

·
Administrator
Joined
·
17,066 Posts
As mentioned above, most use zip ties to hold the rings to the pipe and hoses.
 

·
Registered
Joined
·
447 Posts
Discussion Starter #4
Okay, I was thinking I was missing something with the ring that it was suppose to fit somehow between the floorboard and connector. Tie wrapping them in place will work.
 

·
Registered
Joined
·
1,565 Posts
For a bit easier time figuring out connections, if you have all the same color caps, you could also remove the large ring that goes over the line and use colored zip ties in the corresponding color to the hoses, run through where the old ring did.
 

·
Premium Member
Joined
·
1,610 Posts
1 - 6 of 6 Posts
Top