Green Tractor Talk banner

1 - 1 of 1 Posts

·
Registered User
Joined
·
127 Posts
Discussion Starter #1
Hey guys and gals - we have been taking your suggestions and are working on creating more and more How-To Guides for Installing, Removing and Using a variety of John Deere and other Tractor Attachments. You can view these on our MuttonAttachments.com How-To Guides section but we will also post some of the videos here. For more detailed instructions, visit our website where we break down each step along with a video guide!

How to Install & Remove a John Deere 270A Backhoe


Installing the John Deere 270A Backhoe:

Step 1: Install Lift Rod
Install lift rod to lower draft arms on tractor. Retract drawbar to storage position and remove upper link from tractor 3-point.
Install cross bar and retain with clips. Bend in plates should point away from tractor.
Back tractor into backhoe.

Step 2: Connect Backhoe to Tractor
Raise backhoe to full height using tractor-hitch control lever.
Turn off tractor and engage parking brake
Install Lock Pin through Backhoe and mount frame on each side, from inside, and secure with retainer pins.

Step 3: Connect Hydraulic Hoses
Turn off Tractor
Relieve Hydraulic Pressure by moving hydraulic controls in all directions before disconnecting hydraulic lines
disconnect tractor power beyond hydraulic coupler behind tractor and connect to backhoe coupler tip.
Connect backhoe hydraulic return line coupler to tractor coupler tip.

Step 4: Drive Away
Remove the Lock Pins from the Boom Park and Swing Lock positions.
Raise Stabilizers
Drive Away


Removing the John Deere 270A Backhoe:

Step 1: Lower the Bucket
Lower boom and install swing lock pin and boom lock pins.
Lower Stabilizers
Rotate bucket until teeth are parallel to the ground.
Turn off Tractor

Step 2: Disconnect Hydraulics
Disconnect Power Beyond hydraulic coupler from backhoe coupler tip
Disconnect backhoe hydraulic return line coupler from tractor tip. With lines routed on backhoe side of seat support, connect coupler to backhoe coupler tip.
Connect tractor power beyond hose to tractor coupler tip.

Step 3: Remove Pins and Drive Away
Remove retainer pin and lock pin from backhoe and mount frame on each side.
Lower backhoe to ground.
Release parking brake and Slowly drive tractor forward.
 
1 - 1 of 1 Posts
Top