Green Tractor Talk banner
1 - 5 of 5 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Any suggestion in regard to where I can purchase a side plate kit that is required to mount a JD 48 backhoe on a JD 4720? JD part number LVB25568. This kit is no longer available through John Deere. A source for detailed drawings for the parts included in the kit would really help too. Thanks
 

·
Registered
Joined
·
1,467 Posts
They changed the design, try LVB26163, that's what my JD4500 used for a 485 backhoe. As you have a 4720, there should be no issues. On my 4500, the drawbar hitch was the older style and had to be swapped out for the newer style.

This doc can be found deep in JD sales manual.

782856
 

·
Registered
Joined
·
2 Posts
Discussion Starter · #3 ·
Thanks for the information. I’m new to this so I‘m going to need all the help I can get. Do you know if the 48 backhoe and The 485 will mount on the same mounting hardware? If the 485 will work the 48 will too? Thanks again.
 

·
Registered
Joined
·
12 Posts
Any suggestion in regard to where I can purchase a side plate kit that is required to mount a JD 48 backhoe on a JD 4720? JD part number LVB25568. This kit is no longer available through John Deere. A source for detailed drawings for the parts included in the kit would really help too. Thanks
HI Chuck,
Did you ever find any detailed drawings included with one of these Kits LVB25568?
I agree it would have been very helpful.
Thxs
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top